产品

  • 煤矿井下用塑料(聚乙烯)管材

    压力等级:煤矿井下用供水排水、压风、喷浆管材公称压力为0.4MPa~1.6 MPa
    抽放瓦斯气体管材的最高公称压力为-0.097MPa。
    规格型号:dn20mm~dn1200mm

  • 燃气用埋地聚乙烯(PE)管材

    规格型号:dn20mm~dn630mm。



  • 给水用聚乙烯(PE)管材

    压力等级:0.4MPa~1.6MPa。
    规格型号:dn20mm~dn1200mm。


  • 电熔异径直接

    规格型号:dn 50mm~dn 315mm

  • PE燃气用冷凝水缸

    压力等级:燃气输配工作压力不大于0.5MPa
    Pressure grade: the gas distribution working pressure is not larger than 0.5MPa
    规格型号:dn 63mm~dn 315mm
    Specification and model: dn 63mm~dn 315mm

  • PE注塑管帽

    压力等级:输水工作压力dn<400mm PE注塑管帽最大公称压力1.25MPa, dn≥400mm PE注塑管帽最大公称压力1.0MPa;燃气输配压力可达0.4mpa
    Pressure grade: for water conveying working pressure, when dn<400mm, the maximum nominal pressure of PE plastic injection pipe cap is 1.25MPa; when dn≥400mm, the maximum nominal pressure of PE plastic injection pipe cap is 1.0MPa; the gas distribution pressure can reach 0.4mpa.
    规格型号:dn 25mm~dn 630mm
    Specification and model: dn 25mm~dn 630mm

  • PE焊制四通

    压力等级:适用于工作压力不大于1.25MPa
    Pressure grade: suitable for the working pressure not larger than 1.25MPa
    规格型号:dn 90mm~dn 1000mm
    Specification and model: dn 90mm~dn 1000mm

  • PE 注塑四通

    压力等级:适用于工作压力不大于1.6MPa
    Pressure grade: suitable for the working pressure not larger than 1.6MPa

    规格型号:dn 63mm~dn 355mm
    Specification and model: dn 63mm~dn 355mm

  • PE 90°弯头

    90°注塑弯头 压力等级:dn<400mm PE 90°注塑弯头最大公称压力1.6MPa,dn≥400mm,PE 90°注塑弯头最大公称压力1.0MPa
    Pressure grade: for PE 90° plastic injection elbow with dn<400mm, the maximum nominal pressure is 1.6MPa. For PE 90° plastic injection elbow with dn≥400mm, the maximum nominal pressure is 1.0MPa.
    规格型号:dn 90mm~dn 630mm
    Specification and model: dn 90mm~dn 630mm
    90°焊制弯头 压力等级:适用于工作压力不大于1.25MPa
    Pressure grade: suitable for the working pressure not larger than 1.25MPa
    规格型号:dn 250mm~dn 1200mm
    Specification and model: dn 250mm~dn 1200mm

           

加载更多